Setting up a ceiling fan is a great way to cut energy expenses throughout the year. It helps circulate cool air in the warm summertime, however can also help push heated air back down in the winter, making the temperature level feel warmer and permit you to call down the thermostat. It’s likewise the ideal weekend task for a homeowner, since you can achieve the task in a couple of hours and take pleasure in the financial investment right away.
MATERIALS AND TOOLS
Ceiling fan kit
Ceiling outlet box (approved for ceiling fan).
Expandable brace bar (if no access from above, most convenient) or dimensional framing lumber (2×8″) and screws.
Wire ports, if not consisted of.
Hex-driver or socket wrench.
Ladder or step ladder.
Shatterproof glass and dust mask.
1. When choosing a fan, keep in mind the size of your space. The blades need to be at least 18-24″ from all walls, and be a minimum of 7′ from the floor, and 10″ from the ceiling. Select a 36″ fan if your space is less than 12′ square, 42″ if the room is in between 144″ and 256″ square, and 52″ if the space is more than 15×15′ square.
Select a ceiling box authorized for fans. Boxes for overhead lights are not strong enough to support the weight. Select a metal box that can support the weight. If you have access from the attic above you can set up the box to extra framing between joists. If not, get a brace bar at the hardware shop. This will certainly screw into the joists, and the ceiling box and fan will hang from the freshly included support.
2. Shut off the electricity at the breaker box, then thoroughly eliminate the old lighting fixture and it’s ceiling box with a screwdriver. Make certain the wiring is in good condition and seek advice from an electrical expert to replace if necessary. Making certain the hole is between 2 ceiling joists, trace the overview of the ceiling box onto the ceiling and eliminate the shape with a keyhole saw. It needs to be about 5″ diameter.
3. Following the instructions on the brace bar, position it perpendicular to ceiling joistsand twist the outer bar till it locks into the foot. Continue turning until the foot is attached. Next, turn the inner bar to protect the other foot.
If you’re not utilizing a brace bar, measure the distance in between the ceiling joists, and cut a piece of 2×8″ framing lumber to extend the range, and secure with screws.
4. Carefully draw the wires through the knockout hole in the receptacle box, and attach the fan’s mounting bracket with the hardware consisted of. Attach the fan’s down rod with the round end towards the ceiling, and protected (generally with a consisted of cotter pin). Next off, link the fan’s wires to the circuit wires: white to white, black to black, and the grounding wire to the green lead wire of the fan or a grounding screw. Secure all connections with wire ports, and tuck into the ceiling box.
5. Attach the canopy or medallion utilizing the screws consisted of. Set up the blades using the supplied hardware. See to it all screws are tightened up firmly to the blade irons to prevent wobbling.
6. Finally, if essential follow the instructions for wiring the lighting kit: white to white, and blue to black. Protect the wires with connectors or electrical tape and tuck the wires into the switch real estate. Connect the lighting kit to the fan using the screw provided. Set up any tones and bulbs.
7. Do a final check to make sure everything is safe and secure and turn the power back on at the breaker. Test out the fan. Good task!